User`s manual

[SOURce:]VOLTage
The [SOURce:]VOLTage subsystem controls the amplitude and offset values for all
output waveform shapes.
Subsystem Syntax [SOURce:]
VOLTage
[:LEVel]
[:IMMediate]
[:AMPLitude] <
amplitude>
:UNIT
[:VOLTage] <
units>
:OFFSet <
offset>
[:LEVel][:IMMediate][:AMPLitude]
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude] <amplitude> sets the
output amplitude when
SOURce:FUNCtion[:SHAPe] is set to DC, RAMP, SINusoid,
SQUare, or TRIangle. It sets the positive full-scale output amplitude for arbitrary
waveforms (
SOURce:FUNCtion[:SHAPe] USER set); the least significant DAC
code bit represents 1/4095 of this value.
Output amplitude for ramp, sine, square and triangle wave output may be programmed
in volts, peak volts, peak-to-peak volts, RMS volts, or dBM. Output amplitude for DC
must be programmed in volts; for arbitrary waveform output, volts or peak volts.
The query form returns the amplitude in terms of the default units, specified by the
SOURce:VOLTage[:LEVel][:IMMediate][:AMPLitude]:UNIT[:VOLTage] command.
[SOURce:]VOLTage
Chapter 8 Command Reference 377