User`s manual
[:SEGMent]:DELete:ALL
[SOURce:]LIST[1][:SEGMent]:DELete:ALL deletes all defined waveform segment
definitions from memory and makes all of the waveform memory available for new
waveform segment definitions.
Comments • If any waveform segment is used in any segment sequence, executing this command
generates Error +1102,"Segment in use". No waveform segments will be deleted.
• Use [SOURce:]LIST[1][:SEGMent]:DELete[:SELected] to delete only the currently
selected waveform segment definition.
• Executable when Initiated: No
• Coupling Group: None
• Related Commands: [SOURce:]LIST[1][:SEGMent]:DELete[:SELected]
•
*RST Condition: None
• Power-On Condition: No waveform segments are defined
Example Deleting All Waveform Segments
LIST:DEL:ALL Deletes all segments.
[:SEGMent]:DELete[:SELected]
[SOURce:]LIST[1][:SEGMent]:DELete[:SELected] deletes the currently selected
waveform segment definition and makes its memory available for new waveform
segment definitions.
Comments • If the waveform segment is used in any segment sequence, executing this
command generates Error +1102,"Segment in use". The waveform segment will
not be deleted.
• After deleting the currently selected waveform segment, no waveform segment is
SELected.
• Use [SOURce:]LIST[1][:SEGMent]:DELete:ALL to delete all waveform segment
definitions with one command.
• Executable when Initiated: No
• Coupling Group: None
• Related Commands: [SOURce:]LIST[1][:SEGMent]:DELete:ALL,
[SOURce:]LIST[1][:SEGMent]:SELect
•
*RST Condition: None
[SOURce:]LIST[1]
340 Command Reference Chapter 8