User`s manual

:STARt
[SOURce:]FREQuency[1]:STARt <start_freq> sets the starting sample rate or
waveform frequency for a frequency-swept waveform.
Parameters
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
<
start_freq> numeric see below | MINimum | MAXimum Hz
The legal range for <
start_freq>, as well as the MINimum and MAXimum values, are
context-dependent. See “Coupling Rules” on page 319 for a description of the coupling
between STARt, STOP, CENTer, and SPAN.
Comments • Executable when Initiated: Query form only
• Coupling Group: Frequency
• Related Commands: TRIGger[:STARt]:SOURce,
[SOURce:]FREQuency[1]:CENTer, MODE, RANGe, SPAN, and STOP,
[SOURce:]FUNCtion[:SHAPe], [SOURce:]ROSCillator commands
• *RST Condition: SOURce:FREQuency1:STARt 0.0 Hz
Example Setting the Starting Frequency
FREQ:STAR 1 KHZ Sets the starting frequency to 1000 Hz.
[SOURce:]FREQuency[1]
328 Command Reference Chapter 8