User`s manual

13. Add the Marker Enable
Add the value of the marker enable bit of the second waveform
segment to the value in the second element of the data array.
14. Add the Second Waveform Segment’s Repetition Count
Add the repetition count (number of times the waveform segment is
to be executed) of the second waveform segment to the value in the
second element of the data array.
15. Setup the Sequence List
[SOURce:]LIST[1]:SSEQuence:SELect <name>
[SOURce:]LIST[1]:SSEQuence:DEFine <
length>
16. Store the Segment Sequence as Unsigned Combined Data
[SOURce:]LIST[1]:SSEQuence:COMBined <combined_list>
This command stores the segment sequence in the data array into
sequence memory. The list is in the Unsigned format and sent as
Indefinite Length Arbitrary Block Data (can also be sent as Definite
Length Arbitrary Block Data).
17. Generate the Output
[SOURce:]FUNCtion:USER <name>
INITiate[:IMMediate]
254 High Speed Operation Chapter 7