User`s manual

5. Select the DAC Data Format
[SOURce:]ARBitrary:DAC:FORMat SIGNed
This command selects the SIGNed data (or UNSigned) data format.
6. Setup the First Waveform Segment
[SOURce:]LIST[1][:SEGMent]:SELect <name>
[SOURce:]LIST[1][:SEGMent]:DEFine <
length>
7. Store the First Waveform Segment as Signed Combined Data
[SOURce:]LIST[1][:SEGMent]:VOLTage:DAC <voltage_list>
This command stores the waveform segment into segment memory in
the format set by the
[SOURce:]ARBitrary:DAC:FORMat command.
The data is sent as Definite Length Arbitrary Block Data (can also be
sent as Indefinite Length Arbitrary Block Data).
8. Setup the Second Waveform Segment
[SOURce:]LIST[1][:SEGMent]:SELect <name>
[SOURce:]LIST[1][:SEGMent]:DEFine <
length>
9. Store the Second Waveform Segment as Signed Combined Data
[SOURce:]LIST[1][:SEGMent]:VOLTage:DAC <voltage_list>
This command stores the waveform segment and marker bit into
segment memory in the Signed format set by the
[SOURce:]ARBitrary:DAC:FORMat SIGNed command. The data is
sent as Definite Length Arbitrary Block Data (can also be sent as
Indefinite Length Arbitrary Block Data). In this example, the marker
bit is set at the center of the triangle.
10. Select the First Waveform Segment and Return its Address
[SOURce:]LIST[1][:SEGMent]:SELect <name>
[SOURce:]LIST[1][:SEGMent]:ADDRess?
These commands selects the first waveform segment and then returns
the address. Divide the address by 8 and store it into the first element
of the 32-bit Integer data array that is used to transfer the sequence
list to the AFG.
11. Add the First Waveform Segment’s Repetition Count
Add the repetition count (number of times the waveform segment is
to be executed) of the first waveform segment to the value in the first
element of the data array.
12. Select the Second Waveform Segment and Return its Address
[SOURce:]LIST[1][:SEGMent]:SELect <name>
[SOURce:]LIST[1][:SEGMent]:ADDRess?
These commands selects the second waveform segment and then
returns the address. Divide the address by 8 and store it into the
second element of the data array.
Chapter 7 High Speed Operation 253