User`s manual

The commands are:
1. Reset the AFG
*RST
2. Clear the AFG Memory of All Sequence and Segment Data
[SOURce:]LIST[1]:SSEQuence:DELete:ALL
[SOURce:]LIST[1][:SEGMent]:DELete:ALL
3. Setup the AFG for Output
[SOURce:]FREQuency[1][:CW | :FIXed] <frequency>
[SOURce:]FUNCtion[:SHAPe] USER
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude] <
amplitude>
4. Select the DAC Data Source
[SOURce:]ARBitrary:DAC:SOURce INTernal
This command selects the source that transfers data to the DAC
(see “DAC Sources” on page 280). Use
INTernal to transfer the data
using the
[SOURce:]LIST[1] subsystem.
5. Select the DAC Data Format
[SOURce:]ARBitrary:DAC:FORMat SIGNed
This command selects the SIGNed number format.
6. Setup the Waveform Segment
[SOURce:]LIST[1][:SEGMent]:SELect <name>
[SOURce:]LIST[1][:SEGMent]:DEFine <
length>
7. Store the Waveform Segment as Signed DAC Data
[SOURce:]LIST[1][:SEGMent]:VOLTage:DAC <voltage_list>
This command stores the waveform segment into segment memory
using the Signed number format set by the
[SOURce:]ARBitrary:DAC:FORMat SIGNed command.
8. Setup the Segment Sequence and Generate Output
[SOURce:]LIST[1]:SSEQuence:SELect <name>
[SOURce:]LIST[1]:SSEQuence:DEFine <
length>
[SOURce:]LIST[1]:SSEQuence:SEQuence <
segment_list>
[SOURce:]FUNCtion:USER <
name>
INITiate[:IMMediate]
226 High Speed Operation Chapter 7