User`s manual

Aborting Waveforms
Aborting a waveform places the AFG in the Idle state (Figure 5-4). The
waveform is halted and the output remains at the last amplitude point
triggered when the abort was executed. The command which aborts a
waveform is:
ABORt
Using ABORt, Stop
Triggers, or Gating
Figure 5-4 compares the effects of aborting a waveform, or using stop
triggers or gating to stop or suspend the output.
Figure 5-4. Effects of ABORt, Stop Triggers, and Gating
196 Arming and Triggering Chapter 5