User`s manual

FSK Programming Flowchart
The flowchart in Figure 4-1 shows the commands used to program the AFG
for frequency sweeps, frequency lists, and for frequency-shift keying.
Shown with each command is its power-on/reset setting. Since each
example program begins by resetting the AFG, many of the default settings
are used. Thus, the examples, which follow the sequence, do not execute
every command shown on the flowchart. Remove the flowchart from the
binder for easy accessibility. Refer to the flowchart while doing the
examples in this chapter, if desired.
Figure 4-1. Commands for Frequency Sweeps, Frequency Lists, and FSK Keying
(continued on next page)
118 Sweeping and Frequency-Shift Keying Chapter 4