User`s manual

10. Name the Waveform Segment
[SOURce:]LIST[1][:SEGMent]:SELect <name>
This command names the waveform segment.
11. Set the Waveform Segment Size
[SOURce:]LIST[1][:SEGMent]:DEFine <length>
This command defines the size of the selected waveform segment.
12. Store the Waveform Segment as Volts
[SOURce:]LIST[1][:SEGMent]:VOLTage <voltage_list>
This command stores the segments into the AFG’s segment memory.
13. Name the Segment Sequence
[SOURce:]LIST[1]:SSEQuence:SELect <name>
This command names the segment sequence.
14. Set the Segment Sequence Length
[SOURce:]LIST[1]:SSEQuence:DEFine <length>
This command defines the length of the selected segment sequence.
15. Define the Segment Sequence Order
[SOURce:]LIST[1]:SSEQuence:SEQuence <segment_list>
This command determines the order in which the waveform segments
are to be executed.
16. Select the User Name
[SOURce:]FUNCtion:USER <name>
This command sets the AFG to output the selected segment sequence.
17. Initiate the Waveform
INITiate[:IMMediate]
This command generates an immediate output with the arm source set
to
IMMediate. Refer to Chapter 5 for triggering information.
Chapter 3 Generating Arbitrary Waveforms 101