User`s guide

6-6 Agilent E6432A Microwave Synthesizer User’s Guide

Specifications and Characteristics

Unwanted Signals

Flatness

Flatness is measured across the frequency ranges and refers to changes up and

down in relative output power.

(The following flatness specifications only apply to frequencies < 2.0 GHz after a

power level correction has been performed. For frequencies >/= 2.0 GHz, flatness

degrades by 0.1 dB.)

Flatness (with or without Option 1E1) +/– 0.9 dB

from > +10

to Maximum Leveled Output Power

Flatness (with or without Option 1E1) +/– 0.5 dB from > –10 to +10 dBm

Flatness (with or without Option 1E1) +/– 0.7 dB from > –20 to –10 dBm

Flatness (with Option 1E1) +/– 0.7 dB from > –60 to –20 dBm

Flatness (with Option 1E1) +/– 1.1 dB

from –90 to –60 dBm Typical

Resolution 0.02 dB

Switching Time < 400 us Characteristic,

across ALC range

< 20 ms Characteristic,

with attenuator step change

External ALC Range 40 dB Characteristic

VSWR @ 50 ohm 1.6:1 Characteristic

Low and High Band

Line-Related Spurs < –45 dBc Typical

Fan Microphonics < –45 dBc Typical

Low Band (10 MHz < 2 GHz)

Standard Model

Harmonics (Power Out </= +10 dBm) < –25 dBc