User`s guide

Agilent E6432A Microwave Synthesizer User’s Guide 5-15

Applications and Example Programs

Input and Output Triggers

Before running a list, input and output triggers must be set up. The

synthesizer has two input triggers and two output triggers. The input

triggers are only useful when running a list in the synthesizer (list

mode), but the output triggers are valid when running a list in the

synthesizer or when changing frequency or power or both in set-spot

mode.

Input Triggers Source of Input Triggers

Trig In Trig In connector on the hardware front panel or one of the eight-shared

VXI backplane TTL triggers (TTLTRG0-TTLTRG7)

Sync In Sync In connector on the hardware front panel or one of the eight-shared

VXI backplane TTL triggers (TTLTRG0-TTLTRG7)

Output Triggers Destination of Output Triggers

Trig Out Trig Out connector on the hardware front panel or one of the

eight-shared VXI backplane TTL triggers (TTLTRG0-TTLTRG7) or both

at the same time

Sync Out Sync Out connector on the hardware front panel or one of the

eight-shared VXI backplane TTL triggers (TTLTRG0-TTLTRG7) or both

at the same time