User`s guide

4-250 Agilent E6432A Microwave Synthesizer User’s Guide
CALibrate:FLATness:DATA? (THRU | ATT10 | ATT20 | ATT30 |
ATT40 | ATT50 | ATT60 | ATT70 |EXT1 | EXT2)
CALibrate:FLATness:INITialize:POINts? (THRU | ATT10 | ATT20
| ATT30 | ATT40 | ATT50 | ATT60 | ATT70 | EXT1 | EXT2,
StartFreq, StopFreq, LowStep, HighStep)
CALibrate:FLATness:NEXT? (PMReading)
CALibrate:FLATness:WRITe (EXT1 | EXT2)
CALibrate:FLATness:ZERO (THRU | ATT10 | ATT20 | ATT30 |
ATT40 | ATT50 | ATT60 | ATT70 |EXT1 | EXT2)
CALibrate:IF:UPConverter (IF_Attenuation, Frequency)
CALibrate:IF:FACTory
CALibrate:IQ
CALibrate:IQ:FACTory
CALibrate:IQ:UPConverter (Frequency)
CALibrate:IQ:UPConverter:FACTory
INITiate:CONTinuous (0 | OFF | 1 | ON)
INITiate:CONTinuous?
INITiate[:IMMediate]
LIST:CLEAr
LIST:DWELl (value)
LIST:DWELl?
LIST:INDex?
LIST:POINts (value)
LIST:POINTs?
LIST:RUNNing?
LIST:SETTling (value)
LIST:SETTling?
LIST:SETTling:BIT[ENABle] (0 | OFF | 1 | ON)
LIST:SETTling:BIT[ENABle]?
LIST:STARt[:POINt] (value)
LIST:STARt[:POINt]?
LIST:SYNC:BIT[ENABle] (0 | OFF | 1 | ON)