User`s guide

4-242 Agilent E6432A Microwave Synthesizer User’s Guide

alcOffset

Variable Type ViUInt16

This parameter specifies an ALC integrator zero offset value (a 16 bit

value) that is applied to the ALC Integrator Zero DAC at each

corresponding list point. This allows minimal shift in the power from

the value sent as power when the ALC loop is opened.

Valid range: 0 - 4095

The ALC integrator zero offset value is ignored unless the featureBits

parameter sets Bit 3=1.

Return Value

This return value reports the status of the Write List Point function.

To obtain further information about the status that is returned, call the

HPE6432_error_message function or refer to “Error-Code and

Fail-Code Messages” on page 3-93.