User`s guide

4-148 Agilent E6432A Microwave Synthesizer User’s Guide
featureBits
Variable Type ViUInt32
When using the HPE6432_RunList() function in any of the list modes,
the featureBits parameter controls the features that establish how a
list runs. Changing the feature bits to either on or off has the following
effect on a list:
Decimal
Value
Bit # Effect on a List
0 With all bits set to 0, the list will run once automatically.
--- Bits 0-7 Reserved
256 Bit 8 Step to the next list point for each Trig In trigger
512 Bit 9 Repeat the list continuously until a Run List Abort
function is received
1024 Bit 10 Step through entire list after receiving a Trig In trigger
(Setting this bit clears Bit 8)
2048 Bit 11 Wait for a Sync In trigger before starting the list (Bits 8, 9,
10, and 12 still apply)
4096 Bit 12 Restart a running list when a Sync In trigger is received
Bits 13-15 Reserved
65536 Bit 16 Send Settled Interrupt when list point is settled
131072 Bit 17 Send Sync Output Settled Interrupt when Sync Out bit is set;
the Sync Out bit is set with the
HPE6432_WriteListPoints() function.
Bits 18-31 Reserved.