User`s guide

Agilent E6432A Microwave Synthesizer User’s Guide 4-97
The following signal paths may be specified with this function:
startFreq
Variable Type ViReal64
This parameter specifies the starting frequency of the output power
level correction routine.
stopFreq
Variable Type ViReal64
This parameter specifies the stopping frequency of the output power
level correction routine.
lowBandStep
Variable Type ViReal64
This parameter specifies the low-band frequency step size. The
frequency step size is the difference in frequency steps between each
calibration point.
highBandStep
Variable Type ViReal64
This parameter specifies the high-band frequency step size. The
frequency step size is the difference in frequency steps between each
calibration point.
Parameter Value | Signal Path
0
| FLATNESS_INTERNAL_THROUGH
1
| FLATNESS_EXTERNAL_1
2
| FLATNESS_EXTERNAL_2
3
| FLATNESS_ATTENUATION_10
4
| FLATNESS_ATTENUATION_20
5
| FLATNESS_ATTENUATION_30
6
| FLATNESS_ATTENUATION_40
7
| FLATNESS_ATTENUATION_50
8
| FLATNESS_ATTENUATION_60
9
| FLATNESS_ATTENUATION_70