User`s guide

4-46 Agilent E6432A Microwave Synthesizer User’s Guide
Parameter List
instrumentHandle
Variable Type ViSession
This is the ViSession handle that is obtained from the Initialize
function. The instrumentHandle identifies a particular instrument
session.
startDetFreqRangeHz
Variable Type ViReal64
This parameter specifies the starting frequency for the external
leveling loop configuration being calibrated. Its value is used in
conjunction with the stop and step frequency values that are also
specified.
This start frequency corresponds to the lower-operational range of the
external leveling loop configuration, and can not be less than the
minimum frequency of the synthesizer.
NOTE If other combinations of hardware are being used in the external
leveling loop configuration that do not have an operational range equal
to the external detector being used, their operational range must be
used instead.
stopDetFreqRangeHz
Variable Type ViReal64
This parameter specifies the stopping frequency for the external
leveling loop configuration being calibrated. Its value is used in
conjunction with the start and step frequency values that are also
specified.
This stop frequency corresponds to the upper-operational range of the
external leveling loop configuration, and can not be greater than the
maximum frequency of the synthesizer.
NOTE If other combinations of hardware are being used in the external
leveling loop configuration that do not have an operational range equal
to the external detector being used, their operational range must be
used instead.