User`s guide

Agilent E6432A Microwave Synthesizer User’s Guide 3-125

Soft Front Panel Help

External Modulator Gain Calibration

Start Frequency for External Modulator Gain

Calibration

Start Frequency, available from the External Modulator Gain

Calibration Dialog Box, specifies the starting frequency for the

modulator gain calibration in the external leveling loop configuration.

Its value is used in conjunction with the stop and step frequency values

that are also specified.

This start frequency corresponds to the lower-operational range of the

external leveling loop configuration, and can not be less than the

minimum frequency of the synthesizer.

NOTE If other combinations of hardware are being used in the external

leveling loop configuration that do not have an operational range equal

to the external detector being used, their operational range must be

used instead.

For complete specifications, refer to “Specifications and

Characteristics” on page 6-1.