User`s guide

Agilent E6432A Microwave Synthesizer User’s Guide 3-121

Soft Front Panel Help

Typical Equipment Setup for External Detector Linearization

Start Frequency of an External Detector

Linearization

Start Frequency, available from the External Detector Linearization

Dialog Box, specifies the starting frequency point at which a

linearization calibration is to be performed on the external leveling loop

configuration being used.

This start frequency corresponds to the lower-operational range of the

external leveling loop configuration, and can not be less than the

minimum frequency of the synthesizer.

NOTE If other combinations of hardware are being used in the external

leveling loop configuration that do not have an operational range equal

to the external detector being used, their operational range must be

used instead.

For complete specifications, refer to: “Specifications and

Characteristics” on page 6-1.