User`s guide

Agilent E6432A Microwave Synthesizer User’s Guide 1-5
Installation
Hardware and Software Requirements Prior to Installation
B. Turn power OFF to the C-size VXI mainframe and install the
Slot 0 module being used.
If you have problems or questions regarding the Slot 0 module
installation process, refer to the manufacturer’s documentation that
came with the Slot 0 module being used.
CAUTION Do not turn power ON to the C-size VXI mainframe until you
make all peripheral connections to the Slot 0 module being
used. (Refer to the manufacturer’s documentation that came
with the Slot 0 module being used for details and explanations.)
C. Set up a Windows NT computer.
If you have problems or questions regarding the set up process, refer
to the manufacturer’s documentation that came with the
Windows NT computer being used.
D. Turn power OFF to the Windows NT computer and install the PC
interface card being used.
If you have problems or questions regarding the PCI interface card
installation or connection process, refer to the manufacturer’s
documentation that came with the PCI interface card being used.
E. Connect the interface cable between the PCI interface card and the
Slot 0 module being used.
F. Turn power ON to the Windows NT computer and the C-size VXI
mainframe.
PCI Interface Card
Being Used
One Slot 0 Module Being Used
PCI to IEEE-1394
Interface
Agilent E8491B IEEE-1394 PC Link to VXI
None Required Agilent E623x VXI Embedded PC Controller or
equivalent
PCI-MXI-2 Interface National Instruments VXI-MXI-2