User`s guide

3-96 Agilent E6432A Microwave Synthesizer User’s Guide
Soft Front Panel Help
Errors and Failures Dialog Box
Initialization Errors
0xBFFC0830 ERR_INCORRECT_ID
If the VXI Identifier for the selected board doesn’t
indicate it is an Agilent Technologies
manufactured product, this error is returned.
Verify that the address of the E6432 specified in
the HPE6432_init call is correct.
"Incorrect ID Error"
0xBFFC0831 ERR_INCORRECT_DEVICE_TYPE
If the VXI Device Type Identifier for the selected
board wasn’t programmed properly to the E6432
device value, this error is returned. Verify that the
address of the E6432 specified in the
HPE6432_init call is correct.
"Incorrect Device Type
Error"
0xBFFC0837 ERR_OLD_BOARD_REVISION
This error should not be generated under normal
operation. Contact an Agilent Technologies
Service Center for more information.
"Old Board Revision
ID”
0xBFFC083B ERR_OPTION_DOES_NOT_EXIST
This indicates there was an attempt to perform a
function on the system that requires options that
are not present. For example, if the user
attempted to call the SetExtIfState without
having the IF Option, this error would be
returned.
"Function requires
option that does not
exist.”
Flash Data Errors
0xBFFC0845 ERR_FLASH_DATA_NOT_FOUND
This error should not be generated under normal
operation. Contact an Agilent Technologies
Service Center for more information.
"Flash Data Not
Found - used for data
that may not always
be required.”
0xBFFC0846 ERR_FLASH_DATA_OPTION_NOT_AVAILABLE
This error should not be generated under normal
operation. Contact an Agilent Technologies
Service Center for more information.
"Warning, this flash
data is dependent on
available options
which are not
selected."