User`s guide

3-66 Agilent E6432A Microwave Synthesizer User’s Guide
Soft Front Panel Help
List Dialog Box
• Using the main Soft Front Panel boxes, change the values for a
particular setting by selecting a desired box and clicking on the up
and down arrows, or selecting a desired box and entering the values
directly from the keyboard.
The Sync Out, Blanking, Long Blanking, and Power Search flags are
also controlled by selecting their corresponding box for each entry in
the list.
Related Topics
Soft Front Panel Help
List Dialog Box Controls
Add Below - List Editing Control
Add Below, available from the List Dialog Box, adds a new list point
below the currently active list point.
The point added is exactly the same as the currently active list point,
but can be immediately edited. The values for a list point can be
changed as desired.
NOTE The time to download a list in the List Dialog Box is exponential and is
related to the size of the list; the larger the list, the longer it takes to
load each point into the List Dialog Box.
Adding a single point to a very long list is much slower than adding a
single point to a short list.
The values for a list point can be changed with the following:
• Select an entry in the list using the mouse.
The background color of the selected entry is shaded red, and the
words “Editing Step (followed by the entry position in the list)” is
displayed above the frequency entry box on the main Soft Front
Panel.
• Using the main Soft Front Panel boxes, change the values for a
particular setting by selecting a desired box and clicking on the up
and down arrows, or selecting a desired box and entering the values
directly from the keyboard.
The Sync Out, Blanking, Long Blanking, and Power Search flags are
also controlled by selecting their corresponding box for each entry in
the list.