User`s guide

3-62 Agilent E6432A Microwave Synthesizer User’s Guide
Soft Front Panel Help
List Dialog Box
To activate this Trigger button:
1. On the List Dialog Box, set the Trig In selection to either Trig In 1 or
Trig In 2.
2. On the Configuration Dialog Box, set Trigger Input to Manual.
Related Topics
Soft Front Panel Help
List Dialog Box Controls
Configuration Dialog Box
Sync - List Playing Control
Sync, available from the List Dialog Box, acts as a Sync In trigger and
causes the currently defined list to start running from the beginning. A
Sync In trigger can be used to restart a list at the end of the list or any
arbitrary point in the list while it is running.
If the Repeat box is checked, a new Sync In trigger is required at the
end of a list in order for the list to repeat.
To activate this Sync button:
1. On the List Dialog Box, set the Sync In selection to either Sync In 1,
Sync In 2, or Sync In 3.
2. On the Configuration Dialog Box, set Sync Input to Manual.
Related Topics
Soft Front Panel Help
List Dialog Box Controls
Sync In (Source)
Repeat – List Playing Control
Repeat - List Playing Control
Repeat, available from the List Dialog Box, repeats stepping through
the currently defined list.
If a Trig In (1 or 2) or a Sync In (2, 3, or 4) is specified to start the list, it
will again be required to start each run through the list before the list is
repeated.