User`s guide

Agilent E6432A Microwave Synthesizer User’s Guide 3-55
Soft Front Panel Help
Configuration Dialog Box
This is an output trigger (that can also be used as a marker) and is
asserted during dwell time; the value of the dwell time controls how
long the trigger outputs (Sync Out trigger and Trig Out trigger) are
asserted. The Sync Out trigger is produced after each point in the list
has settled if the point has a Sync Out bit enabled. This output trigger
can be directed to the Sync Out connector on the hardware front panel
or one of the eight-shared VXI backplane TTL triggers
(TTLTRG0-TTLTRG7) or both at the same time.
When the Sync Out trigger is directed to the VXI backplane, the
following apply:
Related Topics
Soft Front Panel Help
Configuration Dialog Box Controls
HPE6432_SetVxiSyncOutput
VXI0 = 0, VXI1 = 1
VXI2 = 2, VXI3 = 3
VXI4 = 4, VXI5 = 5
VXI6 = 6, VXI7 = 7
VXI Backplane TTL
Trigger
The Sync Out trigger is output
to one of the eight-shared VXI
backplane TTL triggers
(TTLTRG0 - TTLTRG7). The
VXI backplane TTL triggers
follow the Synchronous Trigger
Protocol as outlined in the
VXIbus Specification. This
means that the VXI backplane
trigger line is asserted low.
VXI_OUT_OFF = 15 Off No Sync Out trigger is output
to the VXI backplane. The Sync
Out trigger may still be output
to the hardware front panel
using
HPE6432_SetExtSyncOutput.