User`s guide

Agilent E6432A Microwave Synthesizer User’s Guide 3-51

Soft Front Panel Help

Configuration Dialog Box

Trigger Out (Front Panel), available from the Configuration Dialog Box,

provides a way to control the signal on the front panel Trig Out

connector.

This is an output trigger and is produced after each new hardware

frequency or power level setting has settled; the value of the dwell time

controls how long the trigger outputs (Sync Out trigger and Trig Out

trigger) are asserted. The Trig Out trigger can be directed to the Trig

Out connector on the hardware front panel or one of the eight-shared

VXI backplane TTL triggers (TTLTRG0-TTLTRG7) or both at the same

time. This output trigger can also be enabled when changing frequency

or power or both in set-spot mode.

When the Trig Out trigger is directed to the front panel connector, the

following apply: