Service manual

Servicing the Mainframe 53Chapter 3
Replacement Power
Cords
Table 3-3 lists the power cords rated for use with the E8408A mainframe. If
it is necessary to replace the power cord, obtain the appropriate cord listed
in the table or use a cord with the same voltage and current ratings.
Power cords supplied by Agilent have polarities matched to the power input
socket on the instrument:
L = line or active conductor (also called "live" or "hot")
N = neutral or identified conductor
E = earth or safety ground
Cleaning Instructions
The only cleaning required for the E8408A mainframe is to wipe the exterior
of the mainframe with a clean, damp cloth and dry with a clean, dry cloth.
Do not attempt to clean any interior parts of the mainframe.
Table 3-3. Replacement Power Cords for E8408A VXI Mainframe
Country Voltage Part Number Rated Amps
U.K. 250 VAC 8120-1351 10A
Australia 250 VAC 8120-1369 10A
Europe 250 VAC 8120-1689 10A
U.S./Canada 125 VAC 8120-1378 10A
U.S./Canada 250 VAC 8120-5338 10A
Switzerland 250 VAC 8120-2104 10A
Denmark 250 VAC 8120-2956 10A
Japan 100 VAC 8120-4753 12A
India / South Africa 250 VAC 8120-4211 10A