Service manual

Installing Mainframe Options 43Chapter 2
Installing the Airflow Restricter Kit
This section shows how to install an (optional) airflow restricter kit
(E8400-80917) in the E8408A mainframe. To install the kit:
1 Disconnect AC power from the mainframe and place mainframe on
bench.
2 As required, remove filler panels and/or installed VXI instruments
from the mainframe.
3 Follow the steps in Figure 2-23 to install the Airflow Restricter.
Figure 2-23. Installing the Airflow Restricter
Loosen the
Fastening Screw
Slide the Airflow
Restricter Panel Clip
as Shown
1
Place the Airflow Restricter
Panel Clips into the Opening
of the Slot to be Covered
2
Panel Clip as Shown
Slide the Airflow Restricter
3
Tighten the
Fastening Screw