Service manual

34 Installing Mainframe Options Chapter 2
Attach Handles to Rack Mount Adapters (Figure 2-15)
1 Attach a handle to the LH Rack Mount Adapter using two 10-32 X
0.375" flat head screws.
2 Attach a handle to the RH Rack Mount Adapter using two 10-32 X
0.375" flat head screws.
Note The rack mount adapter without the opening is the left-side (LH) Rack
Mount Adapter, and the rack mount adapter
with the cable routing opening
is the right-side (RH) Rack Mount Adapter.
Figure 2-15. Attaching Handles to the Rack Mount Adapters
Flat Head Screws
Flat Head Screws
Left Hand Rack
Mount Adapter
Right Hand Rack
Mount Adapter