Service manual

Installing Mainframe Options 31Chapter 2
Rack Mounting Using Support Rail Kit
This section contains instructions to mount the E8408A mainframe
in a standard EIA cabinet using the Rack Mount/Cable Route Adapter Kit
(E8397A) and the E3663A Support Rail Kit (E3663A). The E3663A is only
compatible with standard EIA cabinets.
Parts List Table 2-3 shows the parts for the Standard Rack Mount/Cable Routing Kit
and the Support Rails Kit
Installation
Procedure
There are three main steps to rack mount the E8408A mainframe using the
Rack Mount/Cable Route Adapter Kit (E8397A) and the Support Rail Kit
(E3663A):
Configure the Mainframe
Set up Cabinet Racks
Install the Mainframe
Table 2-3. Rack Mount Kit and Support Rail Kit Parts Lists
Quantity Description Part Number
Rack Mount/Cable Route Adapter Kit (E8397A)
1 Rack Mount Adapter (right) E8408-61200
1 Rack Mount Adapter (left) E8408-61201
2 Handle (for Rack Mount Adapters) RAF p/n 8344-1032-A34
4 10-32 X 0.375" Flat Head Screw (Handle Screws) 2680-0100
12 M3 X 0.5 Pan Head Screw (Adapter-to Mainframe Screws) 0515-0372
4 Adapter Dress Screw 0570-1577
4 Self-Retained Nut (for Rack Mount Adapters) 0590-0804
1 Front Panel Label Set (Rack-Mount Orientation) E8408-84305
Support Rail Kit (E3663A)
2 Support Rail E3663-00001
4 10-32 Self-Retained Nut 0590-0804
4 10-32 X 0.5" Pan Head Screw 2680-0278