Service manual

Installing Mainframe Options 25Chapter 2

Set Up Rack Cabinet Remove Rack Slide Chassis Sections (Figure 2-7)

1 Open the Rack Slide Kit (1494-0413).

2 Remove the Left-Side (LH) Rack Slide Chassis Section from the

Intermediate Section.

3 Slide the Intermediate Section back into the Stationary Section.

4 Remove the Right-Side (RH) Rack Slide Chassis Section from the

Intermediate Section.

5 Slide the Intermediate Section back into the Stationary Section.

Note Be sure to mark the chassis sections as RH or LH so you can install them

on the proper side of the Rack Mount Adapters. (The Rack Slide is marked

with - RH or - LH on the label to identify it.)

Figure 2-7. Removing Rack Slide Chassis Section

(Right Rack Slide Shown)

Stationary

Section

Rack

Rear

Rack

Front

Intermediate

Section

Chassis

Depress to

Remove Chassis

Section