User`s manual

Appendix C
Agilent E1418A Error Messages
Error Types
Table C-2 lists the error messages generated by the Agilent E1418A
8/16-Channel D/A Converter Module firmware when programmed by SCPI.
Errors with negative values are governed by the SCPI standard and are
categorized in Table C-1. Error numbers with positive values are not governed
by the SCPI standard.
Table C-1. Error Types Described
–199 to –100 Command Errors (syntax and parameter errors). See the
Agilent E1405/E1406 Command Module User’s Manual for
a description of these errors.
–299 to –200 Execution Errors (instrument driver detected errors). See
Table C-2 for these values (also, see the
Agilent
E1405/E1406 Command Module User’s Manual for further
details).
–399 to –300 Device Specific Errors (instrument driver errors that are not
command or execution errors). See Table C-2 for these
values (also, see the
Agilent E1405/E1406 Command
Module User’s Manual
for further details).
–499 to –400 Query Errors (problem in querying an instrument). See the
Agilent E1405/E1406 Command Module User’s Manual for
a description of these errors.
Appendix C Agilent E1418A Error Messages 151