User manual

28 Getting Started Chapter 1
Attaching Terminal
Modules to the
Multiplexer
Figure 1-13 shows how to attach a terminal module to the multiplexer and
how to remove a terminal module from the multiplexer.
Figure 1-13. Attaching a Terminal Module to the Multiplexer
to free it from the multiplexer.
levers and push both levers out simultaneously
use a small screwdriver to release the two extraction
To remove the terminal module from the multiplexer,
Push in the extraction levers
to lock the terminal module
the terminal module to the
Apply gentle pressure to attach
Align the terminal module connectors
to the multiplexer connectors.
onto the multiplexer.
4
multiplexer.
extraction levers
to release the two
3
2
Levers
Extraction
Extraction Lever
Extend the extraction levers on the1
Use small screwdriver
terminal module.
Extraction Lever