User manual

Environment The recommended operating environment for the multiplexer is:
Environment Temperature Humidity
Operating 0
o
C to +55
o
C <65% relative (0
o
C to +40
o
C)
Storage and
Shipment
-40
o
C to +75
o
C <65% relative (0
o
C to +40
o
C)
Multiplexer
Description
The Agilent E1460A 64-channel relay multiplexer module is an
“instrument” in the slot of a VXIbus mainframe. Each module is assigned
an error queue, input and output buffers, and a status register.
Note
Instruments are based on the logical addresses of the plug-in modules. See
the Agilent 75000 Series C Installation and Getting Started Guide to set the
addresses to create an instrument.
Multiplexer
Specifications
Specifications are listed in Appendix A of the Agilent E1460A User’s
Manual. These specifications are the performance standards or limits
against which the module may be tested.
Multiplexer
Serial Numbers
Devices covered by this manual are identified by a serial number prefix
listed on the title page. Agilent Technologies uses a two-part serial number
in the form XXXXAYYYYY, where XXXX is the serial prefix, A is the
country of origin (A=U.S.A.), and YYYYY is the serial suffix. The serial
number prefix identifies a series of identical instruments. The serial number
suffix is assigned sequentially to each instrument. The serial number plate
is located on the right-hand shield near the backplane connectors.
Multiplexer
Options
There are no electrical or mechanical options available for the 64-channel
relay multiplexer module.
Schematics/
Component
Locators
Component locators and schematics for the module are included in this
manual.
Agilent E1460A Service Manual General Information 15