User manual

Shipping
Guidelines
Follow the steps in Figure 1-2 to return the relay multiplexer module to an
Agilent Technologies Sales and Support Office or Service Center.
1 Prepare the module
• Remove any user wiring.
• Attach tag to device that identifies:
– Owner
– Model Number/Serial Number
– Service Required
• Place tagged device in approved anti-static bag.
2 Package the module
• Place packaged device in shipping carton.*
• Place 75 to 100 mm (3 to 4 inches) of
shock-absorbing material around the module.
• Seal the shipping container securely.
• Mark the shipping container FRAGILE.
3 Ship the module to Agilent Technologies
• Place address label on shipping carton.
• Send carton to Agilent Technologies.
* We recommend that you use the same shipping materials as those used in factory packaging (available from
Agilent Technologies). For other (commercially-available) shipping materials, use a double-wall carton with
minimum 2.4 MPa (350 psi) test.
Figure 1-2. Packaging/Shipping Guidelines
14 General Information Agilent E1460A Service Manual