Service manual

Chapter 6
Replaceable Parts
Introduction This chapter contains information to order replaceable parts for the Agilent
E1411A and E1411B multimeters.
Exchange
Assemblies
Tables 6-1 and 6-2 list assemblies that may be replaced on an exchange
basis (EXCHANGE ASSEMBLIES). Exchange, factory-repaired, and
tested assemblies are available only on a trade-in basis. Defective
assemblies must be returned for credit. Assemblies required for spare parts
stock must be ordered by the new assembly part number. Contact your
nearest Agilent Technologies Sales and Support Office for details.
Ordering
Information
To order a part listed in Table 6-1 or 6-2, specify the Agilent part number
and the quantity required. Send the order to your nearest Agilent
Technologies Sales and Support Office.
Replaceable
Parts List
Table 6-1, Agilent E1411A Replaceable Parts, lists replaceable parts for the
E1411A multimeter. See Figure 6-1 (page 6-3) for locations of parts listed
in Table 6-1. Table 6-2, E1411B Replaceable Parts, lists replaceable parts
for the E1411B multimeter. See Figure 6-2 (page 6-5) for locations of parts
listed in Table 6-2.
Agilent E1411A/E1411B Service Manual Replaceable Parts 47