Service manual

Shipping
the Multimeter
If you need to return an E1411 multimeter to Agilent, first remove any
adapters or connectors before packaging the instrument for shipment. When
you return the instrument to Agilent, attach a tag to the instrument
identifying the owner and indicating service or repair required. In any
correspondence, refer to the instrument by model number and full serial
number.
When shipping the instrument, we recommend using containers and
materials identical to those used in factory packaging, which are available
through Agilent Technologies Sales and Support Offices. Mark the shipping
container "FRAGILE" to assure careful handling.
If you use other (commercially available) shipping materials, wrap the
instrument in heavy paper or plastic. Use a strong shipping container. A
double-wall carton of 2.4 MPa (350 psi) test material is adequate.
Use enough shock-absorbing material (75 to 100 mm layer; 3 to 4 inches)
around all sides of the instrument to provide firm cushion and prevent
movement in the container. Protect the front panel with cardboard. Seal the
shipping container securely and mark the container "FRAGILE" to assure
careful handling.
14 Installation Agilent E1411A/E1411B Service Manual