Specifications

Register Addressing
Register addresses for register-based devices are located in the upper 25%
of VXIbus A16 address space. Every VXIbus device (up to 256) is
allocated a 64 byte block of addresses. The HP E1355A and E1356A Relay
Strain Gage Multiplexers with five registers, use five of the 64 addresses
allocated. The HP E1357A and E1358A FET Strain Gage Multiplexers
with eight registers, use eight of the 64 addresses allocated.
Figure D-1 shows the register address location within A16. Figure D-2
shows the location of A16 address space in the HP E1405/E1406 Command
Module and HP E1300/E1301 Mainframe. As an example, both figures
show the register map for the HP E1351A/E1353A FET Multiplexers. This
map is also the same for the HP E1357A/E1358A FET Strain Gage
Multiplexers.
Figure D-1. Multiplexer Registers within A16 Address
120 Strain Gage Register-Based Programming Appendix D
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com