Specifications

Maximum Voltage:
Terminal to Chassis: 15V peak
(input impedance less above 13V peak)
Maximum Current per Channel:
5 mA (non-inductive)
Maximum Offset Voltage:
25 µV (0° to 28°C)
250 µV (28° to 55°C)
(differential High to Low)
Input Impedance:
Power On (Vin <±10V)
High to Low: >10^8Ω
High or Low to Chassis: >10^8Ω
Guard to Chassis: 10 kΩ ±10%
Capacitance:
High or Low to chassis: <200pf
High to Low: <200pf
Power Off:
High to Low:
for Vin ≤13V: >1000Ω
for Vin >13V: >220Ω
Closed Channel Resistance:
<3.1 kΩ for high or low input
(Guard not switched)
Bandwidth (-3 dB):
50Ω source, 1 MΩ||10pf
termination: >500 kHz
(Low tied to chassis)
Screw Terminal Wire Size:
16 AWG Max, 26 AWG Min
Module Size/Device Type:
B, register-based
Connectors Used: P1
Number of Slots: 1
Interrupt Level: selectable
Power Requirements:
Voltage: +5V +12V
Peak module
current, IPM (A): 0.53 0.13
Dynamic module
current, IDM (A): 0.01 0.01
Strain Gage Excitation
(chassis referenced):
+4.63V ±10%
Max Current: 400mA
(short circuit protected)
Watts/Slot: 2.8
Cooling/Slot:
0.02 mm H
2
O @ 0.10 liter/sec
Humidity: 65% 0° to 40°C
Operating Temperature:
0° to 55°C
Storage Temperature:
-40° to 75°C
EMC, RFI, Safety:
meets FTZ 1046/1984, CSA 556B,
IEC 348, UL 1244
Net Weight (kg): 0.9
102 HP E1355A, E1356A, E1357A, E1358A Specifications Appendix A
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com