User`s manual

Example Reading the Description of a Card #1 Module
SYST:CDES? 1 Determine the description
:CTYPe? SYSTem:CTYPe? <number> returns the module (card) type of a selected
module in a switchbox.
Parameters
Parameter Name Parameter Type Range of Values
number numeric 1 - 99
Comments
• Multiplexer Module Model Number: The SYSTem:CTYPe?
<number>command returns:
HEWLETT-PACKARD,E1346A,0,A.01.00
Note: The first number after the E1346 model number is the serial
number of the module (always 0); the module revision code follows
the serial number.
Example Reading the Model Number of a Card #1 Module
SYST:CTYP? 1 Determine the model number
:CPON SYSTem:CPON<number>|ALL opens all channels of a selected or all
modules (cards) in a switchbox.
Parameters
Parameter Name Parameter Type Range of Values
number numeric 1 - 99
Comments
• Differences between *RST and CPON: SYSTem:CPON only
opens all channels of a selected or all modules in a switchbox. *RST
opens all channels of all modules in a switchbox and also sets the
trigger, etc. modes to the power-on states.
Example Opening all Channels of a Card #1 Module
SYST:CPON 1 Opens all channels of module #1
56 Agilent E1346A Multiplexer Command Reference Chapter 5