User`s manual

MONitor:CARD DISPlay:MONitor:CARD <number>|AUTO selects the module in a
switchbox to be monitored.
Parameters
Parameter Name Parameter Type Range of Values
<number>|AUTO numeric 1 - 99
Comments
• Selecting a Specific Module to be Monitored: Send the card
number in a switchbox with the DISPlay:MONitor:CARD command.
• Selecting the Present Module to be Monitored: Use the
DISPlay:MONitor AUTO command to select the last module
addressed by a switching command (e.g., [ROUTe:]CLOSe).
• *RST Condition: DISPlay:MONitor:CARD AUTO.
Example Select Module #2 in a Switchbox for Monitoring
DISP:MON:CARD 2 Selects module #2 in a switchbox
Chapter 5 Agilent E1346A Multiplexer Command Reference 45