User`s manual

DISPlay
The DISPlay subsystem monitors the channel state of a selected module (or
card) in a switchbox. Only operates with mainframes that have a display,
such as the Agilent 75000 Series B Mainframe (Agilent Model Number
E1301).
Subsystem Syntax DISPlay
:MONitor
[:STATe] <boolean>
:CARD <number>|AUTO
MONitor[:STATe] DISPlay:MONitor[:STATe] <boolean> turns the monitor mode on or off.
Parameters
Parameter Name Parameter Type Range of Values
ON |OFF |1 |0 boolean 0 |1 |ON |OFF
Comments
• Monitoring Switchbox Channels: DISPlay[:STATe] ON or
DISPlay[:STATe] 1 turns the monitor mode on to show the channel
state of the selected module. DISPlay[:STATe] OFF or
DISPlay[:STATe] 0 turns the monitor mode off.
• Selecting the Module to be Monitored: Use the
DISPlay:MONitor:CARD <number>|AUTO command to select the
module.
• Monitor Mode on an Agilent 1301 Mainframe Display: The
following shows the monitor mode on the display of an Agilent
E1301 Mainframe
:Switch_112: Chan: 1 93
The example shows that channels 01 and 93 (DT Tree Switch) are
closed.
• *RST Condition: DISPlay:MONitor[:STATe] OFF |0
Example Enabling the Monitor Mode
DISP:MON:CARD 2 Selects module #2 in a switchbox
DISP:MON 1 Turns the monitor mode on
44 Agilent E1346A Multiplexer Command Reference Chapter 5