User`s manual

ARM
The ARM subsystem selects the number of scanning cycles (1 through
32767) for each INITiate command.
Subsystem Syntax ARM
:COUNt <number>MIN |MAX
:COUNt? [MIN |MAX]
:COUNt ARM:COUNt <number>allows scanning cycles to occur a multiple of times
(1 to 32767) with one INIT command and INIT:CONT OFF is set.
Parameters
Parameter Name Parameter Type Range of Values
number numeric 1 |32767 |MIN |MAX
Comments
•
Number of Scans: Use only values between 1 to 32767 for the
number of scanning cycles.
• Related Commands: ABORt, INITiate:IMMediate
• *RST Condition: ARM:COUNt 1
Example Setting Ten Scanning Cycles
ARM:COUN 10 Set 10 scanning cycles
SCAN (@100:147) Sets channel list
INIT Starts scanning cycle
:COUNt? ARM:COUNt? [MIN |MAX] returns current number of scanning cycles set
by ARM:COUNt. A value is supplied if no MIN or MAX parameter is sent.
With MIN or MAX passed as parameters, MIN returns 1 and MAX returns
32767.
Parameters
Parameter Name Parameter Type Range of Values
MIN |MAX numeric MIN = 1, MAX = 32767
Comments
• Related Commands: INITiate:IMMediate
Example Query Number of Scanning Cycles
ARM:COUN 10 Sets 10 scanning cycles
ARM COUN? Query number of scanning cycles;
returned value is 10
Chapter 5 Agilent E1346A Multiplexer Command Reference 43