User`s manual

Connecting Field Wiring
Figure 2-1 shows the terminal block for the 48-Channel Single Ended Relay
Multiplexer Module (Agilent E1346A). Use the following guidelines for
wire connections.
Wiring Guidelines
• If possible, use shielded cables with the shields connected to the
Guard (G) terminals and to the low connection near the measurement
point.
• Be sure the wires make good connections on the screw terminals.
Figure 2-1. Multiplexer Module Terminal Block
18 Configuring the Agilent E1346A Multiplexer Module Chapter 2