Service manual

3
Replaceable Parts
Introduction This chapter contains information to order replaceable parts for Agilent
E1346A Single Ended Relay Multiplexers with serial number prefixes
2934A and below. Table 3-1 lists assembly and terminal block part numbers
for the multiplexer, Table 3-2 lists replaceable parts for the multiplexer,
Table 3-3 shows reference designators for parts in Table 3-2, and Table 3-4
shows the manufacturer code list for these parts.
To order a part listed in Table 3-2, specify the Agilent Technologies part
number and the quantity required. Send the order to your nearest Agilent
Technologies Sales and Support Office.
Replaceable
Parts List
Table 3-2, Agilent E1346A Replaceable Parts, lists replaceable parts for the
Agilent E1346A Single Ended Relay Multiplexer with serial number prefix
2934A. See Figures 3-1 and 3-2 for locations of selected mechanical parts.
See the Component Locator diagrams at the end of Chapter 4 - Service for
locations of electrical components. See Table 3-1 for replacement part
number for E1346A Component Assembly and Terminal Block. A relay
multiplexer consists of the E1346-66201 Component Assembly and a
Terminal Block.
A Terminal Block consists of a Terminal Card and a Terminal Case
Assembly. For example, to order an E1346A Terminal Block, use
E1346-80001. To order only the Terminal Card, use E1346-66510.
To order only the Terminal Case Assembly, use E1300-84401.
Table 3-1. Relay Multiplexer Assembly/Terminal Block Part Numbers
Multiplexer Component
Assembly
Terminal Block Terminal Card Terminal Case
Assy
E1346A SE Relay Mux E1346-66201 E1346-80001 E1346-66510 E1300-84401
Replaceable Parts 3-1