Service manual

360 PAUSE
370 CLEAR SCREEN
380 PRINT TABXY(1,1),"DC Isolation Tests "
390 PRINT TABXY(1,3),"HI to CHASSIS (Ohms)";Value(0)
400 PRINT TABXY(1,4),"HI to LO (Ohms) ";Value(1)
410 PRINT TABXY(1,5),"HI to GUARD (Ohms) ";Value(2)
420 END
Typical Result A typical result for an overload on all three measurements is :
DC Isolation Tests
HI to CHASSIS (Ohms) 1.E+38
HI to LO (Ohms) 1.E+38
HI to GUARD (Ohms) 1.E+38
Verification Tests 2-19