Service manual

Multiplexer
Serial Numbers
Multiplexers covered by this manual are identified by a serial number prefix
listed on the title page. Agilent Technologies uses a two-part serial number
in the form XXXXAYYYYY, where XXXX is the serial prefix, A is the
country of origin (A=USA), and YYYYY is the serial suffix. The serial
number prefix identifies a series of identical instruments. The serial number
suffix is assigned sequentially to each instrument.
The serial number plate is located on the backplane connector. If the serial
number prefix of your instrument is greater than the one listed on the title
page, a Manual Update (as required) will explain how to adapt this manual
to your instrument.
Multiplexer
Options
There are no electrical or mechanical options available for the Agilent
E1346A Single-Ended Relay Multiplexer.
Schematics/
Component
Locators
Component locators and schematics for the multiplexers are packaged with
this manual. Clear plastic sleeves are included for storage.
1-7 General Information