User`s manual

92 Index
S (continued)
SCPI Commands (continued)
SYSTem subsystem
, 65–67
TRIGger subsystem, 68–70
Select Code 8, 80
Selecting
channels
, 14
interrupt priority, 26
Service Request (SRQ), GPIB, 46
Setting
card ID
, 23
logical address switch, 23
scan complete bit, 46
Signal Conditioning Components, adding, 27–28
Soft Front Panel Information.
See VXIplug&play Online Help
Specifications
, 73–74
Speed of Throughput, 79–80
*SRE, 46, 71
*SRE?, 71
Static Electricity, 19
Status Register, 46, 63
definition, 83
reading, 81
writing to, 82
STATus Subsystem, 63–64
STATus:OPERation:ENABle, 46, 63
STATus:OPERation[:EVENt]?, 46, 64
*STB?, 46, 71
Strain Gages, 5 volt excitation, 27
Switchbox
card numbers
, 14–15
configuration, 14, 25
connecting
channels to common
, 32
to tree terminals, 34–35
continuous scanning, 55
logical address, 14–15, 25
measure thermocouple temperature, 39
multiple module, 15, 33
scanning
channels
, 41, 60–61
commands, 41
range of channels, 36
requirements, 38
selecting channels, 14
single module, 14, 33
Switches
AT Tree
, 11–13, 34–36, 38–39
AT2 Tree, 11, 13, 35, 38–39
BT Tree, 11–13, 34–35, 38
channel, 11
relay, 11
logical address, 23
RT Tree, 12–13, 39
tree, 11–13
SYSTem Subsystem, 65–67
SYSTem:CDEScription?, 65
SYSTem:CPON, 66
SYSTem:CTYPe?, 66
SYSTem:ERRor?, 67
T
Temperature Measurement, 39–40
Terminal Modules, 11
jumper, 12
wiring, 21
guidelines, 20
Thermocouple
compensation
, 40
measuring temperature with, 39–40
wiring, 20
Throughput Speed, 79–80
Tree Switches, 11–12
AT, 11–13, 34–36, 38–39
AT2, 11, 13, 35, 38–39
BT, 11–13, 34–35, 38
register, 81–83
RT, 12–13, 39
terminals, 11
Tree Terminals, connecting, 34–35
*TRG, 71–72
Trig Out Port, 36, 44
enabling, 41, 57
query state, 57
scanning using, 45
shared by switchboxes, 57
Trigger Sources, scanning, 41, 69–70
TRIGger Subsystem, 68–70
TRIGger[:IMMediate], 68
TRIGger:SOURce, 41, 69
TRIGger:SOURce?, 70
*TST?, 71–72