User`s manual

54 Relay Multiplexer Command Reference
:MONitor[:STATe]
DISPlay:MONitor[:STATe] <mode> turns the monitor mode on or off.
Parameters
Comments • Monitoring Switchbox Channels: DISPlay:MONitor[:STATe] ON or
DISPlay:MONitor[:STATe] 1
turns the monitor mode ON to show the channel
state of the selected module.
DISPlay:MONitor[:STATe] OFF or
DISPlay:MONitor[:STATe] 0 turns the monitor mode OFF.
• Selecting the Module to be Monitored:
Use the
DISPlay:MONitor:CARD <number>|AUTO command to select the
module.
• Monitor Mode on an E1301A Mainframe Display: The following shows the
monitor mode on the display of an E1301 Mainframe.
SWITCH_112: Chan: 0,1, , , , , , , , ,
The example shows that channels 00 and 01 are closed.
• *RST Condition: DISPlay:MONitor[:STATe] OFF|0
Example Enabling the Monitor Mode
DISP:MON:CARD 2
Selects module #2 in a switchbox.
DISP:MON 1
Turns the monitor mode on.
Parameter Name Parameter Type Range of Values
<
mode>
boolean 0 |1|ON|OFF