User`s manual

70 Agilent E1330B Digital I/O Module Command Reference
Chapter 5
:VME:SIZE
MEMory:VME:SIZE [<base>]<size> sets the size, in bytes, of the external memory.
Parameters
Comments • Address plus size must not exceed #HE00000.
• base specifies the numeric format as decimal, hexadecimal, octal, or binary.
IEEE-488.2 specifies the following values for this parameter:
Decimal = no parameter
Hexadecimal = #H
Octal = #Q
Binary = #B
• Related Commands: MEMory:VME:ADDRess?, MEMory:VME:SIZE?,
MEMory:VME:STATe?
• *RST Condition: #H000000.
:VME:SIZE?
MEMory:VME:SIZE? [<MIN|MAX>] queries for the current VME memory size.
The optional parameter lets you query for the fixed maximum or minimum VME
memory size.
Parameters
Comments
• This command always returns the memory size in decimal format.
• The size returned using MIN is always 0.
• The size returned using MAX is always 12582912.
• Related Commands: MEMory:VME:ADDRess?, MEMory:VME:SIZE,
MEMory:VME:STATe?
Parameter Name Parameter Type Range of Values Default
<
base>
Discrete none, #H, #Q, or #B Decimal
<
size>
Numeric
or
Discrete
000000
16
- C00000
16
or
MIN or MAX
None
None
Parameter Name Parameter Type Range of Values Default
MIN|MAX Discrete none, MIN, or MAX None