User`s manual

Agilent E1330B Digital I/O Module Command Reference 101
Chapter 5
[SOURce:]
(continued)
DIGital:IOn?
DIGital:TRAce:CATalog?
DIGital:TRAce[:DATA] <
name>,<block_data>
DIGital:TRAce[:DATA]? <
name>
DIGital:TRAce:DEFine <
name>,<size>,[<fill>]
DIGital:TRAce:DEFine? <
name>
DIGital:TRAce:DELete:ALL
DIGital:TRAce:DELete[:NAME] <
name>
Returns the current state of the I/O
control line on port n
(downloaded SCPI driver only).
Returns the currently defined memory blocks.
Writes a block of data to
name.
Reads a block of data from
name.
Defines
name, size, and initial fill for a memory block.
Returns the size, in bytes, of the named memory block.
Deletes all memory blocks.
Deletes the named memory block.
STATus:
OPERation:CONDition?
OPERation:ENABle <
mask>
OPERation:ENABle?
OPERation[:EVENt]?
PRESet
QUEStionable:CONDition?
QUEStionable:ENABle <
mask>
QUEStionable:ENABle?
QUEStionable[:EVENt]?
Returns contents of Condition Register.
Sets
mask for Enable Register.
Returns
mask set in Enable Register.
Returns the contents of the Event Register.
Clears Enable Registers.
Returns contents of Condition Register.
Sets
mask for Enable Register.
Returns
mask set in Enable Register.
Returns the content of the Event Register.
NOTE: The STATus subsystem is provided for compatibility only. The Digital I/O module does not use the Operation Status or
Questionable Status Registers.
SYSTem:
CDEScription? <number>
CTYPe? <
number>
ERRor?
VERsion?
Returns a string description of the module
(download SCPI driver only).
Returns a string of the module number
(download SCPI driver only).
Returns the contents of the system Error Register.
Returns the SCPI version to which this instrument complies.
Command Description