Service manual

Shipping
the Multimeter
If you need to return the Agilent E1326B multimeter to Agilent
Technologies, first remove any adapters or connectors before packaging
the instrument for shipment. When you return the instrument to
Agilent, attach a tag to the instrument identifying the owner and
indicating service or repair required. In any correspondence, refer to
the instrument by model number and full serial number.
When shipping the instrument, we recommend using containers and
materials identical to those used in factory packaging, which are
available through Agilent Sales and Service Offices. Mark the shipping
container "FRAGILE" to assure careful handling.
If you use other (commercially available) shipping materials, wrap the
instrument in heavy paper or plastic. Use a strong shipping container.
A double-wall carton of 2.4 MPa (350 psi) test material is adequate.
Use enough shock-absorbing material (75 to 100 mm layer; 3 to 4
inches) around all sides of the instrument to provide firm cushion and
prevent movement in the container. Protect the front panel with
cardboard. Seal the shipping container securely and mark the container
"FRAGILE" to assure careful handling.
2-2 Installation